Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
NEWS CENTER
Advantages and installation steps of aluminum profile radiators
Release time:
2023-05-29 11:25
Key words:
Aluminium Radiator
Aluminum profile radiators have the characteristics of beautiful appearance, light weight, good heat dissipation performance, and good energy-saving effect.
Advantages of Aluminum Profile Radiators
Aluminum profile radiators mainly include high-pressure cast aluminum and extruded aluminum alloy welding.
① The aluminum profile radiator has good heat dissipation and obvious energy-saving characteristics. In the same room, if radiators of the same specification are used, the number of aluminum castings is less than that of steel.
② Aluminum profile radiators have good oxidation resistance and corrosion resistance, without adding any additives. Its principle is that once aluminum encounters oxygen in the air, it forms a tough and dense oxide film to prevent further corrosion of bulk materials.
Choose an aluminum profile radiator, preferably a high-pressure cast aluminum modular radiator. This radiator is a complete die-casting process, and there is no problem of water leakage in the welds. And its biggest advantage is that the product is not limited by the residential heating system, and even in an open boiler system, it will not be corroded by oxygen. Due to the modular design, if the indoor temperature is insufficient after a heating season, one or two pieces can be added in the next year to meet their own needs, instead of replacing the whole set of heating like steel radiator.
In addition, due to the different water quality requirements of aluminum radiators compared to steel, it is necessary to avoid mixing aluminum radiators with other materials.
Profile radiator
Installation steps for aluminum profile radiator
Firstly, please open the packaging of the aluminum radiator and install the exhaust valve and connector.
The position of the dedicated hook installation hole can be drawn on the wall according to the provided installation diagram or relevant requirements.
3. Install an aluminum profile radiator, considering the damage caused by thermal expansion and cold contraction of the heating pipe to the radiator.
4. Place the expansion tube 12 and lay it flat.
5. Please drill 12 holes with an impact drill, and the depth of the holes should be flush with the wall after the expansion tube is inserted.
6. Install the bottom hook and tighten the screws after meeting the requirements.
7. Place the aluminum profile radiator on the bottom mounted hook, install the hook above, and adjust the position of the hook. After clamping, the expansion screw can be tightened. When placing the radiator, please place the exhaust valve above.
8. After installing and assembling the pipe joints, install the pipes according to the drawing requirements and connect them to the inlet and outlet. Tighten them at all places, with the rear side 3.5cm away from the wall and 5cm away from the skirting line.
9. Please input hot water, open the exhaust valve, and vent until the water comes out. During operation, the aluminum profile radiator should not exceed the working pressure listed in the manual by 0.12 MPa.
10. The oxygen content in the heating medium shall not exceed 0.05 grams per square meter. The medium water used in the radiator should meet the requirements of PH9 ≤ 9, and PH12 ≤ when internal anti-corrosion measures are taken.
Related news
What are the materials commonly used for shielding frames and covers?
The shielding frame and shield are tools used to shield electronic signals. The function is to shield the influence of external electromagnetic waves on internal circuits and the external radiation of electromagnetic waves generated internally.
What is a shielding frame or shield? What does it consist of?
The shielding frame and shield are tools for electronic signals. The function is to prevent the impact of external electromagnetic waves on internal control circuits and the radiation of electromagnetic waves generated by internal management in the enterprise.
What principles should be followed when selecting hardware stamping parts
Hardware stamping parts use punches and molds to deform or break stainless steel, iron, aluminum, copper, and other plates or materials to achieve the required size and shape. If the material selection of hardware stamping parts is not appropriate, it is easy to produce defective products, leading to high costs and other reasons. What principles should be followed when selecting hardware stamping parts?
Copyright © 2020 Shenzhen Huafu Hardware Products Co., LTD All Rights Reserved
Powered by: www.300.cn